National Occupational Classification (NOC) 2016 Version 1.1
- 9 - Occupations in manufacturing and utilities
- 94 - Processing and manufacturing machine operators and related production workers
- 943 - Machine operators and related workers in pulp and paper production and wood processing and manufacturing
9436 - Lumber graders and other wood processing inspectors and graders
Lumber graders and other wood processing inspectors and graders inspect and grade lumber, shingles, veneer, waferboard and similar wood products to identify defects, ensure conformance to company specifications and classify products according to industry standards. They are employed by sawmills, planing mills, wood treatment plants, waferboard plants and other wood processing companies.
- grader - wood processing
- grader tallyman/woman - wood processing
- lumber grader
- particleboard grader - wood processing
- plywood grader
- plywood inspector
- veneer grader
- wood measurer
- Forest products technologists (See 2211 Chemical technologists and technicians)
- Log scalers (See 2223 Forestry technologists and technicians)
- Production technologists in sawmills (See 2233 Industrial engineering and manufacturing technologists and technicians)
- Supervisors, forest products processing (See 9215 Supervisors, forest products processing)
Lumber graders perform some or all of the following duties:
- Examine lumber visually for knots, holes, splits and other defects and sort for further drying, trimming or remanufacturing
- Measure lumber using callipers, gauges and tape measures to ensure specified thickness, length and width
- Classify and sort lumber according to industry standards and stamp lumber to indicate grade, wood type, moisture level and other characteristics
- Tally lumber
- Complete and maintain reports.
Other wood processing inspectors and graders perform some or all of the following duties:
- Inspect plywood panels, veneer sheets, panelboards, shingles and similar wood products visually for knots, holes, splits, straightness and other defects
- Mark defects and sort for repair or reprocessing
- Measure wood products to ensure conformance to specifications using standard measuring instruments
- Grade and label wood products according to quality standards
- Complete and maintain inspection and grading reports.
- Completion of secondary school is usually required.
- On-the-job training and up to two weeks of classroom training are provided for lumber graders.
- Previous experience as a sawmill machine operator, other wood processing operator or as a labourer in wood processing is usually required for graders and inspectors in this unit group.
- Lumber graders require a lumber grader's licence issued by a provincial lumber association.
- There is some mobility between employers processing similar wood products.