Frontier Counts (FC)
Detailed information for August 2017
The Frontier Counts data provide a full range of statistics on the number of international travellers by selected category and by type of transportation as well as the number of automobiles, trucks and other vehicles entering Canada.
Data release - September 11, 2017, Leading indicator of cross-border traveller volume
Since the 1920s, Canada Border Services Agency (CBSA) has supplied Statistics Canada with administrative data on all international travellers who have been cleared for entry or re-entry into Canada.
The Frontier Counts data provide a full range of statistics on the number of international travellers by selected category and by type of transportation as well as the number of automobiles, trucks and other vehicles (motorcycles, snowmobiles, bicycles) entering Canada.
Frontier Counts data are used by the Tourism Satellite Account (TSA), CBSA, Destination Canada, Immigration Refugees and Citizenship Canada, provincial tourism agencies, the United States Department of Commerce and a number of private sector industries. The data are also used for reporting to international organizations such as the World Tourism Organization (WTO), the Organisation for Economic Co-operation and Development (OECD) and the Pacific-Asia Travel Association (PATA).
Reference period: Month
Collection period: During the month following the reference month.
- International travel
- Tourism indicators
- Travel and tourism
Data sources and methodology
The target population is all international travellers entering Canada by post of entry either by air, sea or land. The international travellers are distributed into categories of flows which are, Canadian residents returning to Canada from the United States, Canadian residents returning to Canada from countries other than the United States (direct or via the United States), United States residents entering Canada, Residents of countries other than the United States entering Canada (direct or via the United States), and finally "Other" travellers which consist of foreign and resident crew members, diplomats, military personnel, immigrants and former residents. The observed population is the same as the target population.
This methodology does not apply.
Depending on the mode of entry into Canada, the Frontier Counts correspond either to a complete census - or a sample. For entry into Canada by automobile, train, bus, boat (commercial and private), plane (private) and some of the commercial plane in small airports, Statistics Canada receives administrative data from Canada Border Services Agency (CBSA) that correspond to a complete census of travellers entering Canada. For the following 19 airports: Gander, St-John's, Halifax, Québec City, Montréal, Mirabel, Mont-Tremblant, Ottawa, London, Toronto Terminal 1, Toronto Terminal 3, Toronto Island, Winnipeg, Saskatoon, Regina, Edmonton, Calgary, Vancouver and Victoria, Statistics Canada receives the E311 Declaration Cards that international travellers must complete and provide to the CBSA officers when entering Canada.
From these cards, Statistics Canada obtains the number of travellers that came through each of the airports, as well as, for the visitors to Canada, their country of residence. With the high number of cards received on a yearly basis (more than 22 million) and resource and time constraints, a sample design was developed for processing of the cards.
Data are extracted from administrative files.
For 19 airports, a sample of E311 Declaration Cards is taken in order to estimate the number of travellers that came to Canada, by country of residence. For all other Canada Border Services Agency (CBSA) ports of entry, data are extracted from administrative files or captured from administrative forms provided to Statistics Canada. For these ports of entry, the information is collected on a census basis. The counts are captured from following paper tally sheets obtained from CBSA: E-62 Entry Tallies, E-62B Entry Tallies for buses, E-62T Entry Tallies specifically for trucks and E63 tally sheets for commercial and private planes and boats and their passengers and crew. In the case of the majority of land ports of entry, Statistics Canada receives monthly electronic files from CBSA's Integrated Primary Inspection Lane system (IPIL). The data are verified and validated, and aggregates are obtained and included in the Frontier Counts System. The number of travellers, country of residence, transportation mode and length of stay are obtained from these forms and are used for the estimation of Frontier Counts.
The Frontier Counts compiles data collected about international travellers entering Canada, recorded by CBSA officials using various means. Each port of entry provides this administrative data in accordance with an understanding signed by Statistics Canada and CBSA.
At all ports of entry across Canada, a count is done to determine the number of travellers by selected categories, by type of transportation, as well as the number of vehicles (cars, trucks, motorcycles, snowmobiles and bicycles) in the case of highway and ferry ports. Various means of collecting Frontier Counts data are described below.
E311 Declaration Card: Form used at the 19 major international airports to record on a census basis travellers entering Canada by commercial plane, including schedule and charter arrivals.
E-62 Entry Tally: Form used by ports to record the number of travellers and vehicles arriving by land and by ferry, at ports of entry on the United States-Canada border. Each form indicates the number of automobiles, trucks, motorcycles, bicycles, snowmobiles and their associated travellers cleared for entry by CBSA agents, as well as the travellers coming to Canada by other modes of transport such as bus, train and on foot.
E-62 B - Bus Entry Tally: a version of the E-62 form that is used specifically for bus travellers.
E-62 T - Entry Tally for trucks: a version of the E-62 form that is used specifically for truck travellers.
E63 Commercial and Private Craft/Passenger and Crew Arrivals: Form used to record travellers entering Canada by private plane or boat. This form is also used to record travellers and crews on commercial freighters, passenger ferries, cruises and some commercial flights.
E63-1 Passenger and Crew Arrivals, Cruise Vessel: Forms completed by ports during cruise ship season.
Integrated Primary Inspection Line (IPIL): Formerly known as the Primary Automated Lookout System (PALS), IPIL has been used to count automobile traffic at land ports since 1998.
NEXUS: A program designed to expedite the border clearance process for low-risk, pre-approved travellers into Canada and the United States.
CANPASS telephone reporting system: It records the number of travellers entering Canada by private plane or boat. The CANPASS system also allows pre-authorized travellers, as well as special permit holders, to cross the border without interaction with a CBSA's agent.
Overseas Summary Report: It is used to record the country of residency of overseas travellers who enter Canada at land and ferry ports of entry.
There are various processes involved in the Frontier Counts system. Within each process, several edits and verifications are done.
In the data capture of paper forms such as the E-62 Tally sheets, edits are included in the data capture system to minimize errors and evaluate the data quality. For the data capture of theE63 tallies, experienced personnel first evaluate the forms received, and define if travellers included in the forms are part of the target population, before doing the data capture. In the case of E311 Declaration Cards, a process is in place to proceed with the sampling of the E311 Declaration Cards, and the capture of certain fields for the sampled cards. In all of the steps, edits are in place to minimize errors in the captured field. For instance, in the case of country of residence of travellers, a comparison is always made between the captured information and a list of valid country codes.
Finally, once the data are aggregated, comparisons to historical data, as well as comparisons to alternate source of information are done to validate the results.
When there are data missing for a traveller category for a specific port of entry, manual imputation is done. Historical data, auxiliary information and information obtained from comparable ports of entry are used in the imputation process.
In the case of Frontier Counts done on a census basis, the estimation is the direct sum of the data obtained. In the case of data obtained from the 19 international Canadian airports, the estimation of the number of travellers for the different categories is obtained by weighting the number of sampled cards in relation to the total number of cards. The weight obtained is then applied for the total number of travellers reported on each card. The variance is calculated directly.
A monitoring system has been established to compare incoming information with information available from independent sources, such as toll figures, airport management reports, provincial road counters, etc. Irregular fluctuations in the figures reported by ports of entry may be addressed by contacting officials of the port of entry for confirmation and explanation.
During the verification and analysis of estimates for the current reference month, comparisons are made with estimates from the previous year's same reference month. At this stage, errors or inconsistencies are identified and corrective measures are taken.
The administrative forms received from each port of entry are edited prior to processing the enclosed data. Various verifications are done during the data capture to ensure the precision of the data and that there are no missing values. Communications with CBSA ports are initiated when data gaps exist.
Statistics Canada is prohibited by law from releasing any information it collects which could identify any person, business, or organization, unless consent has been given by the respondent or as permitted by the Statistics Act. Various confidentiality rules are applied to all data that are released or published to prevent the publication or disclosure of any information deemed confidential. If necessary, data are suppressed to prevent direct or residual disclosure of identifiable data.
Revisions and seasonal adjustment
The seasonal adjustments are done on seasonal components, trading day effects and moving holiday factors. Seasonally-adjusted series are calculated using Statistics Canada's X12 ARIMA program in which components of a seasonal time series are removed.
All seasonally adjusted data may be revised every month for three months prior to the month studied and every year for the three years prior to the year studied.
Some not seasonally adjusted data for a specific quarter may be revised once the data from the electronic questionnaires for that quarter are available. These include same-day and overnight data for United States residents entering by commercial plane, train, commercial boat or other methods (for example, by foot or motorcycle) and any summation of these series. They also include same-day and overnight data for Canadian residents returning from the United States by commercial plane, private plane, train, commercial boat, private boat or other methods (for example, by foot or motorcycle) and any summation of these series.
In the case of air travellers for which we use a sample of Declaration Cards, the coefficients of variation (CV) of the estimates vary from less than 1% to 5%. Coverage errors are not calculated but are considered to be low. For E311 Declaration Cards, coverage errors are insignificant because travellers are obligated to hand in their cards to Canada Border Services Agency (CBSA) officers. The other customs declaration cards are filled out by CBSA officers. Therefore the coverage error is expected to be low. CANPASS users are also obligated to report to CBSA officers.
Processing errors are not calculated. However, many safeguards and a thorough analysis of the data ensure that the processing error is negligible.
- Date modified: